Aruba Instant On 1430 26G 2SFP Switch
Aruba Instant On 1430 26G 2SFP Switch (R8R50A) |
|
|||
I/O ports and slots |
26 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP 1GbE ports |
|
||
Physical Characteristics |
|
|||
Dimensions |
225(d) x 388(w) x 44(h) mm |
|
||
Weight |
5.00 lb (2.27 kg) |
|
||
Processor and Memory |
32Mb Flash; Packet buffer size: 12.0 Mb |
|
||
Performance |
|
|
||
100 Mb latency |
< 5.21 µSec |
|
||
1000 Mb latency |
> 2.90 µSec |
|
||
Throughput (Mpps) |
41.68 Mpps |
|
||
Capacity |
56 Gbps |
|
||
MAC address table size |
16384 entries |
|
||
Reliability MTBF (years) |
171.9 |
|
||
Environment |
|
|||
Operating temperature |
32°F to 104°F (0°C to 40°C) |
|
||
Operating relative humidity |
15% to 95% @ 104°F (40°C) non-condensing |
|
||
Nonoperating/ storage temperature |
-40°F to 158°F (-40°C to 70°C) up to 15000 ft |
|
||
Nonoperating/ storage relative humidity |
15% to 90% @ 149°F (65°C) non-condensing |
|
||
Altitude |
up to 10,000 ft (3 km) |
|
||
Acoustics |
Fanless |
|
||
Electrical Characteristics |
|
|||
Frequency |
50Hz/60Hz |
|
||
AC voltage |
100-127VAC / 200- 240VAC |
|
||
Current |
0.4A / 0.3A |
|
||
Maximum power rating |
16.4W |
|
||
Idle power |
8W |
|
||
PoE power |
- |
|
||
Power Supply |
Internal Power Supply |
|
||
Safety |
|
|
||
Emissions |
|
|
||
Immunity |
BS/EN 55035, CISPR 35, KS C 9835 |
|
||
Generic |
EN 55035, CISPR 35 |
|
||
EN |
EN/IEC 61000-4-2 |
|
||
ESD |
EN/IEC 61000-4-3 |
|
||
Radiated |
EN/IEC 61000-4-4 |
|
||
EFT/Burst |
EN/IEC 61000-4-5 |
|
||
Surge |
EN/IEC 61000-4-6 |
|
||
Conducted |
EN/IEC 61000-4-8 |
|
||
Power frequency magnetic field |
EN/IEC 61000-4-11 |
|
||
Voltage dips and interruptions |
EN/IEC 61000-3-2 |
|
||
Harmonics |
EN /IEC 61000-3-3 |
|
||
Device Management |
Unmanaged |
|
||
Mounting |
|
|||
Mounting positions and supported racking |
|
|
||
Transceivers |
|