SUPERMICRO MB 1xLGA1151 (i7), Q170,DDR4,6xSATA3,PCIe 3.0 (1 x16, 2 x4, 1 x1),1x M.2,HDMI,DP,DVI,Audio
Popis
SUPERMICRO MB 1xLGA1151 (i7), Q170,DDR4,6xSATA3,PCIe 3.0 (1 x16, 2 x4, 1 x1),1x M.2,HDMI,DP,DVI,Audio
Zeptejte se
7 386 Kč
6 104,13 Kč bez DPH
Skladem 1 ks, expedice zítra
Doporučte
Product SKUs
MBD-X11SSQ X11SSQ
Physical Stats
Form Factor Micro-ATX
Dimensions 9.6" x 9.6" (24.38cm x 24.38cm)
Processor/Cache
CPU Intel® 6th Generation Core? i3 series, Intel® 6th Generation Core? i5 series, Intel® 6th Generation Core? i7 series, Intel® 7th Generation Core? i3 series, Intel® 7th Generation Core? i5 series, Intel® 7th Generation Core? i7 series, Intel® Celeron®, Intel® Pentium®.
Single Socket H4 (LGA 1151) supported, CPU TDP support Up to 91W
Note BIOS version 2.0 or above is required to support 7th Generation Intel® Core? Processors
System Memory
Memory Capacity Up to 64GB Unbuffered non-ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
Memory Type 2400/2133/1866MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes 4GB, 8GB, 16GB
Memory Voltage 1.2V
On-Board Devices
Chipset Intel® Q170 Express
SATA Intel® Q170 Express controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
Intel RST
Network Controllers Single LAN with Intel® PHY I219LM LAN controller
Single LAN with Intel® Ethernet Controller I210-AT
Audio ALC 888S HD Audio
Graphics Intel® HD Graphics
3 Independent Displays
Input / Output
SATA 6 SATA3 (6Gbps) ports
LAN 2 RJ45 Gigabit Ethernet LAN ports
USB 8 USB 2.0 ports (4 rear + 4 headers)
4 USB 3.0 ports (2 rear + 2 headers)
Video Output 1 HDMI port, 1 DP (DisplayPort) port, 1 DVI - D port,
3 Independent Displays
Serial Port / Header 4 COM Ports (4 headers)
TPM TPM Header
Others 8 bit GPIO, Force On mode by jumper and AC recovery
Expansion Slots
PCI-E 1 PCI-E 3.0 x16,
2 PCI-E 3.0 x4,
1 PCI-E 3.0 x1
M.2 PCI-E x2 M Key 2242/2260/2280, PCI-E 3.0 x4 with open slots
M.2 1 M.2 PCI-E 3.0 x2, 2242/2260/2280
System BIOS
BIOS Type AMI UEFI
BIOS Features Plug and Play (PnP)
DMI 2.3
USB Keyboard support
UEFI 2.3.1
ACPI 5.0
SMBIOS 3.0
PCI 3.0
Management
Software AMT, NMI, SuperDoctor® 5, vPro, Watchdog
Power Configurations ACPI Power Management
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Force Power On by Jumper
PC Health Monitoring
Voltage +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 4 -fan status, Chassis intrusion header, Memory, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature, VBAT
FAN 4x 4-pin fan headers (up to 4 fans), Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Support 3-pin fans (w/o speed control), System level control, Thermal control tachometer fan connectors
Temperature CPU thermal trip support, Adaptive Thermal Monitor, PECI 3.0, Thermal Monitor 2 (TM2) support, PECI
LED CPU / System Overheat LED, Standby alert LED
Other Features ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Intel Smart Response Technology, M.2 NGFF connector, RoHS, System level control, WOL
Operating Environment
Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range -20°C ~ 60°C (-4°F ~ 140°F)
Operating Relative Humidity Range 10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range 10% ~ 95% (non-condensing)
MBD-X11SSQ X11SSQ
Physical Stats
Form Factor Micro-ATX
Dimensions 9.6" x 9.6" (24.38cm x 24.38cm)
Processor/Cache
CPU Intel® 6th Generation Core? i3 series, Intel® 6th Generation Core? i5 series, Intel® 6th Generation Core? i7 series, Intel® 7th Generation Core? i3 series, Intel® 7th Generation Core? i5 series, Intel® 7th Generation Core? i7 series, Intel® Celeron®, Intel® Pentium®.
Single Socket H4 (LGA 1151) supported, CPU TDP support Up to 91W
Note BIOS version 2.0 or above is required to support 7th Generation Intel® Core? Processors
System Memory
Memory Capacity Up to 64GB Unbuffered non-ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
Memory Type 2400/2133/1866MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes 4GB, 8GB, 16GB
Memory Voltage 1.2V
On-Board Devices
Chipset Intel® Q170 Express
SATA Intel® Q170 Express controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
Intel RST
Network Controllers Single LAN with Intel® PHY I219LM LAN controller
Single LAN with Intel® Ethernet Controller I210-AT
Audio ALC 888S HD Audio
Graphics Intel® HD Graphics
3 Independent Displays
Input / Output
SATA 6 SATA3 (6Gbps) ports
LAN 2 RJ45 Gigabit Ethernet LAN ports
USB 8 USB 2.0 ports (4 rear + 4 headers)
4 USB 3.0 ports (2 rear + 2 headers)
Video Output 1 HDMI port, 1 DP (DisplayPort) port, 1 DVI - D port,
3 Independent Displays
Serial Port / Header 4 COM Ports (4 headers)
TPM TPM Header
Others 8 bit GPIO, Force On mode by jumper and AC recovery
Expansion Slots
PCI-E 1 PCI-E 3.0 x16,
2 PCI-E 3.0 x4,
1 PCI-E 3.0 x1
M.2 PCI-E x2 M Key 2242/2260/2280, PCI-E 3.0 x4 with open slots
M.2 1 M.2 PCI-E 3.0 x2, 2242/2260/2280
System BIOS
BIOS Type AMI UEFI
BIOS Features Plug and Play (PnP)
DMI 2.3
USB Keyboard support
UEFI 2.3.1
ACPI 5.0
SMBIOS 3.0
PCI 3.0
Management
Software AMT, NMI, SuperDoctor® 5, vPro, Watchdog
Power Configurations ACPI Power Management
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Force Power On by Jumper
PC Health Monitoring
Voltage +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 4 -fan status, Chassis intrusion header, Memory, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature, VBAT
FAN 4x 4-pin fan headers (up to 4 fans), Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Support 3-pin fans (w/o speed control), System level control, Thermal control tachometer fan connectors
Temperature CPU thermal trip support, Adaptive Thermal Monitor, PECI 3.0, Thermal Monitor 2 (TM2) support, PECI
LED CPU / System Overheat LED, Standby alert LED
Other Features ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Intel Smart Response Technology, M.2 NGFF connector, RoHS, System level control, WOL
Operating Environment
Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range -20°C ~ 60°C (-4°F ~ 140°F)
Operating Relative Humidity Range 10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range 10% ~ 95% (non-condensing)