VERBATIM 3D Printer Filament PMMA DURABIO 2.85mm ,60m, 500g transparent
Ilustrační obrázek
Popis
Popis produktu TECHNICAL SPECIFICATIONS Diameter 2.85 mm ± 0.10 mm Roundness >95% RAL N/A Weight 500 g Color transparent MATERIAL PROPERTIES Density 1.31 g/cm3 (Test method: ISO 1183) MVR 230°C/2.16 kg 10 cm3/10min (ISO 1133) MFR 230°C/2.16 kg 13 gr/10 min (Test method: ISO 1133) Elongation at ...
Zeptejte se
628 Kč
519,01 Kč bez DPH
Skladem 1 ks, expedice dnes
Doporučte
Popis produktu
TECHNICAL SPECIFICATIONS
Diameter 2.85 mm ± 0.10 mm
Roundness >95%
RAL N/A
Weight 500 g
Color transparent
MATERIAL PROPERTIES
Density 1.31 g/cm3 (Test method: ISO 1183)
MVR 230°C/2.16 kg 10 cm3/10min (ISO 1133)
MFR 230°C/2.16 kg 13 gr/10 min (Test method: ISO 1133)
Elongation at break 130% (Test method: ISO 527)
Tensile strength 64 MPa (Test method: ISO 527)
Tensile modulus 2300MPa (Test method: ISO 527)
Flexural modulus 2100MPa (Test method: ISO 178)
Flexural strength 94 MPa (Test method: ISO 178)
Impact strength - Charpy method 23°C 9 kJ/m2 (Test method: ISO 179)
Moisture absorption 0.2% (Test method: MCC Method)
Coefficient of linear thermal expansion (-20~80°C) 7.3E-05 (Test method: ISO 11359-2)
Heat deflection temperature 1.80 MPa 82°C (Test metod: ISO 75-1)
Transparency 2% (Test method: ISO 13468)
RECOMMENDED PRINTER SET UP
Extrusion temperature 225 - 245°C
Melting temperature 235°C
Bed temperature 85°C
Printing speed 50 mm/s
Fan speed (can be changed to 0% is the model is warping) 10%
TECHNICAL SPECIFICATIONS
Diameter 2.85 mm ± 0.10 mm
Roundness >95%
RAL N/A
Weight 500 g
Color transparent
MATERIAL PROPERTIES
Density 1.31 g/cm3 (Test method: ISO 1183)
MVR 230°C/2.16 kg 10 cm3/10min (ISO 1133)
MFR 230°C/2.16 kg 13 gr/10 min (Test method: ISO 1133)
Elongation at break 130% (Test method: ISO 527)
Tensile strength 64 MPa (Test method: ISO 527)
Tensile modulus 2300MPa (Test method: ISO 527)
Flexural modulus 2100MPa (Test method: ISO 178)
Flexural strength 94 MPa (Test method: ISO 178)
Impact strength - Charpy method 23°C 9 kJ/m2 (Test method: ISO 179)
Moisture absorption 0.2% (Test method: MCC Method)
Coefficient of linear thermal expansion (-20~80°C) 7.3E-05 (Test method: ISO 11359-2)
Heat deflection temperature 1.80 MPa 82°C (Test metod: ISO 75-1)
Transparency 2% (Test method: ISO 13468)
RECOMMENDED PRINTER SET UP
Extrusion temperature 225 - 245°C
Melting temperature 235°C
Bed temperature 85°C
Printing speed 50 mm/s
Fan speed (can be changed to 0% is the model is warping) 10%